Pasar al contenido principal
Search Interpretations

Interpretation ID: aiam2263

Mr. G.E. Adams, Technical Manager, Dunlop Limited, Engineering Group, Holbrook Lane Coventry CV6 4AA, England; Mr. G.E. Adams
Technical Manager
Dunlop Limited
Engineering Group
Holbrook Lane Coventry CV6 4AA
England;

Dear Mr. Adams: This is in response to your letter of March 17, 1976, requestin information concerning steps which you, as a manufacturer of wheel equipment which will be offered for importation into the United States, must take in order to comply with all applicable National Highway Traffic Safety Administration regulations.; You should be aware of 49 CFR Part 566, *Manufacturer Identification* and 49 CFR Part 573, *Defect Reports*. In addition, Federal Motor Vehicle Safety Standard No. 119, *New Pneumatic Tires for Vehicles Other Than Passenger Cars*, may be of interest to you. Copies of these rules and an information sheet entitled 'Where to Obtain Federal Motor Vehicle Safety Standards and Regulations' are enclosed for your convenience.; Section 110(e) of the National Traffic and Motor Vehicle Safety Act (1 U.S.C. S1399(e)) requires every manufacturer who offers a motor vehicle or item of motor vehicle equipment for importation into the United States to designate a permanent resident of the United States as his agent, upon whom service of all processes, orders, notices, decisions, and requirements may be made.; The procedural regulations (49 CFR 551.45) for designation of agen pursuant to the Act requires that it include:; >>>(1) A certification by its maker that the designation is binding o Dunlop Limited under the laws, corporate bylaws, or other requirements governing the making of the designation at the time and place where it is made,; (2) The full legal name, principle place of business and mailin address of Dunlop Limited,; (3) Trade names or other designations of origin of the products o Dunlop Limited that do not bear its legal name,; (4) A provision that the designation of agent remain in effect unti with drawn or replaced by Dunlop Limited,; (5) A declaration of acceptance duly signed by the agent appointed which may be an individual, a firm, or a U.S. Corporation, and (6) The full legal name and address of the designated agent.<<<; A copy of the procedural regulation for designation of agent i enclosed for your convenience.; Sincerely, John Womack, Assistant Chief Counsel