Interpretation ID: nht91-2.12

DATE: March 6, 1991

FROM: Mark A. Pacheco -- Vice President, Innovative Industries of Tampa, Inc.

TO: Department of Transportation, NHDSA

TITLE: Re Subj: Ruling on Motorized Scooter

ATTACHMT: Attached to letter dated 4-1-91 from Paul Jackson Rice to Mark A. Pacheco (A37; VSA S 102(3))

TEXT:

On behalf of our client Walk Machine Corporation, 17690 South Dixie Hwy (US-1), Miami, FL 33157, Florida USA. We would like to obtain a ruling from you regarding their "Walk Machine". Attached for your reference is a brochure on the product.

These are being manufactured in Brazil by Hatsuta Industrial S.A., Av. Monteiro Lobato, 2700 - CEP: 07190 - Guarulhos - SP - Brazil and imported.

From our study it does not fail under any federal regulations and since this is designed for off road use, we would like to get a confirmation from you that no other approvals are required.

If you should have any questions or comments or need additional information, please do not hesitate to contact me.

Attachment

WALK MACHINE (Graphics omitted) The Walk Machine is a new concept for pedestrian's mechanization. Safe and easy to drive, after few minutes of training, you will be ready to move economically along at speeds up to 16 MPH.

SUPER ECONOMIC

It is very economical - 37cc and 1 HP engine goes up to 50 miles with one liter of gas. Its 0,3 gallons fuel tank can take you for up to 62 miles. It is easier to handle than a bike, a motorcycle, or a car. Due to its extremely safe.

EASY TRANSPORT

The Walk Machine is light (40 pounds) and has a foldable handle - bar - you can transport in a car trunk - or on a car rack. You can take with you on a trip or on a day out without any problems!

SPECIFICATIONS

Engine......................... 2 strokes Cylinder capacity.............. 37 cc (2,25 cu. inches)

o Piston x Stroke.............. o 1,4 x 1,5 inches Maximum Power.................. 1 HP at 5.500 RPM Refrigeration.................. Air, "Ram - Air" flaps Ignition....................... Magnet and secondary coil Carburetor..................... Ventury piston type o 0,55 inches lubrification.................. 2 stroke oil 25:1 Traction....................... Pulleyes and belts Net Weight..................... 40 pounds Fuel Tank...................... 0.3 gallons Maximium Speed................. 16 miles p/ hr. Normal Speed................... 7,5 miles p/ hr. Maximium load.................. 220 pounds Tires.......................... 3.25 x 6 (special) Tire gauge..................... 18 to 20 lbs.

NOTE: The technical characteristics of this vehicle might be changed by the manufacturer without prior notice.

Walk Machine is a trade mark registered in USA and other countries Walk Machine is patented in USA and other countries.

WALK MACHINE CORPORATION HATSUTA INDUSTRIAL S.A. 17690 South Dixie Hwy (US - 1) Av. Monteiro Lobato, 2700 - CEP: 07190- Miami FL 33157, Florida USA Guarulhos - SP - Brazil Phone.: (305) 378-4564 / 378-4531 Tel.: (011) 209-2133 - Telex: 1165033 HABR - Fax.: (305) 378-9318 Fax: (011) 209-2593