Interpretation ID: 1983-1.28

TYPE: INTERPRETATION-NHTSA

DATE: 03/21/83

FROM: AUTHOR UNAVAILABLE; Frank Berndt; NHTSA

TO: Gold Bug

TITLE: FMVSS INTERPRETATION

TEXT: This responds to your February 9, 1983, letter asking about the compliance of a device that you manufacture with Federal motor vehicle safety standards. The device is a head support for children which has several uses, one of which would be in a car seat. You specifically ask to obtain the Federal seal for use on your package.

Only those items of equipment to which specific Federal safety standards apply are marked with the DOT symbol which indicates that they are in compliance with applicable safety standards. From our analysis of your product, it is not a piece of equipment subject to any Federal motor vehicle safety standard. Since your device does not need to comply with any of our requirements, you would not need, nor would you be permitted to use, the DOT symbol.

We would recommend, however, from a product liability point of view that you ensure that your product complies with flammability requirements. I am enclosing a copy of our flammability standard that you might use as a guideline, although as I stated earlier, you would not be required to comply with this standard.

ENC.

February 9, 1983

Diane Steed National Highway Traffic Safety Administration

Dear Ms. Steed,

Your name was given to us by Diane Emrick of the Colorado Division of Highway Safety.

We manufacture a product called Head Up. We are enclosing a sample for your inspection.

We would like to put the National Seal on the package. As you can see the Colorado Division has approved this item.

Please let me know the procedures for acquiring the National Seal. Thank you.

Robert P. Eschino, Vice President