Interpretation ID: nht76-1.20

DATE: 06/16/76

FROM: AUTHOR UNAVAILABLE; R. L. Carter; NHTSA

TO: Moss Motors, Ltd.

TITLE: FMVSS INTERPRETATION

TEXT: The President has asked me to reply to your letter of February 9, 1976, concerning the application of Federal Motor Vehicle Safety Standard No. 106-74, Brake Hoses, to replacement brake hoses for MG sports cars built from approximately 1945 to 1955.

All brake hose and brake hose end fittings manufactured on or after September 1, 1974, must meet the performance and labeling requirements of Standard No. 106-74. All brake hose assemblies manufactured on or after March 1, 1975, must meet those performance and labeling requirements in the standard that apply to assemblies and, with an exception noted below, must be constructed of conforming hose and end fittings.

The Federal motor vehicle safety standards are not applicable to classic or antique cars in the following sense: a standard applies only to a motor vehicle or item of motor vehicle equipment that is manufactured after its effective date. Thus, for example, there is no requirement that the MG's in question be retrofitted with conforming brake hose. However, any person manufacturing brake hose for use in such a vehicle must, on and after September 1, 1974, ensure that the hose conforms.

You may find some relief in S12 of the standard. To facilitate the depletion of inventories of hose manufactured before September 1, 1974, that conforms to all aspects of the standard except the labeling requirements, this provision permits the use of such hose in assemblies manufactured before September 1, 1976.

There are no Federal motor vehicle safety standards that apply to hydraulic brake system components other than Standard No. 106-74, Brake Hoses, and Standard No. 116, Motor Vehicle Brake Fluids.

Sincerely,

ATTACH.

MOSS MOTORS, Ltd.

April 14, 1976

Department of Transportation Washington, D.C.

Dear Sirs:

I am very disappointed at not having received a reply to my letter of February 9, 1976, a copy of which is enclosed herewith.

May I please have the courtesy of a prompt reply to this letter?

Yours very truly,

E. Alan Moss

Enclosure: letter copy

February 9, 1976

Department of Transportation Washington, D.C.

Dear Sirs:

I am writing to you at this time in order to attempt to clarify the present situation as regards hydraulic brake hoses as fitted to older British Sports Cars.

I have just finished reading all available information published by the Department of Transportation covering the manufacture of hose and fittings effective September 1, 1974, manufacture of brake hose assemblies March 1, 1975, and manufacture of vehicles effective September 1, 1975.

A very large part of our business is in the sales of replacement parts for the British MG sports car as built from approximately 1945 to approximately 1955. These are the models designated as TA, TB, TC, TD, TF add Y. All of these vehicles had hydraulic braking systems built by British Lockheed Corporation, from whom we have been obtaining replacement parts in the past. We are now unable to supply our customers with any brake hoses whatsoever due to the fact that Lockheed has apparently not "tooled up" to produce these hoses to your new specifications as yet and probably will not do so, at least until they can catch up with the present more popular hoses. There are 2 other companies, one in England and one in Australia, who have supplied replacement hoses in the past but I do not believe that they are labeled to meet the United States specifications.

While we are very anxious to be able to supply our customers with brake hoses in order to keep these rather elderly cars running, we certainly do not want to be party to supplying any hoses which would be unsafe or illegal, particular in light of todays very common lawsuits. I have heard, unofficially, that the DoT requirements are not applicable to older (classic or antique?) cars and would like to hear from you directly as to how we should best handle this situation.

I would also like to know if there are any regulations covering other hydraulic brake components such as cylinders, repair kits, or merely hoses and fluid.

Anxiously awaiting your prompt reply, I remain,

yours very truly,

E. Alan Moss