Interpretation ID: nht78-2.15

DATE: 03/15/78

FROM: AUTHOR UNAVAILABLE; J. J. Levin, Jr.; NHTSA

TO: Vetter Fairing Company

TITLE: FMVSS INTERPRETATION

TEXT: This is in reply to your letter of February 1, 1978, on motorcycle headlighting.

You have asked whether the prohibition in SAE J580a Sealed Beam Headlamp against headlamp covers applies to a motorcycle. You have also asked the reason for the prohibition.

SAE J580a Sealed Beam Headlamp is incorporated by reference in Table III of Standard No. 108 as one of the standards applicable to headlamps for use on passenger cars, and on multipurpose passenger vehicles, trucks, and buses whose overall width is less than 80 inches. One of the SAE standards incorporated by reference for motorcycle headlighting is J584 which, as an option, allows motorcycles to be equipped with headlamps "meeting the requirements of SAE J579" (i.e. passenger car sealed beam headlamps). There is no reference in J579a to J580a, and we therefore do not read the prohibition against headlamp covers as applying to motorcycles equipped with sealed or unsealed headlamps.

The reason for the prohibition is the degradation in Light output that can result from condensation under unsealed glass covers or from obscuration by grilles in front of the lens.

SINCERELY,

Vetter Fairing Company

February 1, 1978

Office of Chief Council Joseph J. Levin, Jr. National Highway Traffic Safety Admin.

Dear Sir:

After reviewing Title 49 Code of Federal Regulations 571.108, Motor Vehicle Safety Standard Number 108, Lamps, Reflective Devices and Associated Equipment, I find a need to have several points of this regulation, relevant to our business, clarified and interpreted per your office.

Table III, Required Motor Vehicle Lighting Equipment, Item - Headlamps, references the applicable SAE standard or recommende practice for passenger cars, multipurpose passenger vehicles, trucks and buses to be, in part, SAE J580a, June 1966. Contained within SAE J580a, sealed beam headlamp, under General Requirements it states "A headlamp, when in use, shall not have any styling or other feature, such as a glass cover or grille in front of the lens."

Is it correct to assume that this prohibition does not apply to a motorcycle or to a motorcycle with attached side car? Also would you please state the reason/s why passenger cars are prohibited from having any styling or other feature, such as a glass cover or grille in front of the lens when a headlamp is in use?

Table III, Required Motor Vehicle Lighting Equipment, Item - Headlamps, references the applicable SAE standard or recommended practice for motorcycles to be, in part, SAE J584, April 1964. Standard SAE J584, motorcycle and motor driven cycle headlamps makes no mention of any prohibition of having any styling or other feature, such as a glass cover or grille in front of the lens when a headlamp is in use.

Is it correct to infer that it is legal and within the scope of Motor Vehicle Safety Standard Number 108, to have styling or other feature, such as a glass cover, or plastic cover or grille in front of the lens when a headlamp is in use on a motorcycle or on a motorcycle with attached side car?

It is in the intent of Vetter Fairing Company as a manufacturer of motorcycle accessories to conceive, research, design, produce, manufacture and market motorcycle accessories which meet or exceed all Federal Motor Vehicle Safety Standards of the National Highway Traffic Safety Administration, Department of Transportation.

Your review of any and all applicable regulations relevant to our business is appreciated and your interpretation of such regulations pertaining to the above questions is requested so that we can meet our obligations, to consumers, to manufacturer motorcycle accessories which are safe and which comply with all Federal Motor Vehicle Safety Standards.

W. W. Schwartz Technical Engineer Research & Development Dept.

cc: C. VETTER C. PERETHIAN