Interpretation ID: nht74-1.39

DATE: 02/25/74

FROM: AUTHOR UNAVAILABLE; James B. Gregory; NHTSA

TO: Ford

TITLE: FMVSS INTERPRETATION

TEXT: This is in reply to your letter of January 24, 1974, asking for an interpretation as to whether a rear lamp assembly design that Ford demonstrated to NHTSA representatives conforms to the location requirements of Standard No. 108. The assembly consists of three units which, from outboard to inboard, as a rear lighting assembly, comprise the tail lamp/stop lamp, backup lamp, and turn signal lamp.

Standard No. 108 specifies that stop lamps, tail lamps, and turn signal lamps be "as far apart as practicable." The standard does not specify a minimum separation distance of lamps, a maximum permissible location inboard, or location of one system relative to another. The determination of practicability in lamp spacing is to be made by the vehicle manufacturer, and the agency has generally afforded manufacturers some latitude in this interpretation.

Therefore, the configuration you have described and demonstrated would not violate Standard No. 108. It should be noted, however, that it would be in conflict with the requirements for rear turn signals and stop lamps as proposed in Docket 69-19, Notice 3.

Sincerely,

ATTACH.

January 24, 1974

James B. Gregory -- Administrator, National Highway Traffic Safety Administration

Dear Dr. Gregory:

On January 14 Ford demonstrated a rear lamp design that it plans to use on one of its 1975 models. The purpose of the demonstration was to display the design and make sure there were no misunderstandings as to the lamp's conformance with the location requirements of Motor Vehicle Safety Standard No. 108. Ford pointed out that the various functions of the lamp were "as far apart as practicable" for the rear end design of the vehicle and for the separation of signal functions by space and color in which both the NHTSA and Ford are interested.

For the record the lamp assembly may be described as follows: Red White Amber Left side shown (Approximately to scale)

* The outboard pod has a red lens and wraps around the quarter panel, thus serving as a rear side market, taillamp and stop lamp and as side and rear reflex reflectors.

* The center pod has a white lens and serves as the backup lamp.

* The inboard pod has an amber lens and serves as the turn signal lamp.

While it is our impression that NHTSA technical personnel who examined this lamp design agreed that it fully meets the location requirements of Standard No. 108, we should appreciate formal confirmation that the Administration concurs in our interpretation.

Respectfully submitted,

J. C. Eckhold -- Director, Automotive Safety Office, FORD MOTOR COMPANY