Interpretation ID: nht92-1.45

DATE: 12/02/92

FROM: FRANK E. TIMMONS -- ASSISTANT VICE PRESIDENT, TIRE DIVISION, RUBBER MANUFACTURERS ASSOCIATION

TO: PAUL JACKSON RICE -- CHIEF COUNSEL, NHTSA

TITLE: NONE

ATTACHMT: ATTACHED TO LETTER DATED 2-11-93 FROM JOHN WOMACK TO FRANK E. TIMMONS (A40; STD. 109; STD. 119; PART 574); ALSO ATTACHED TO LETTER DATED 11-13-92 FROM PAUL JACKSON RICE TO UNDER SECRETARY, KUWAIT MINISTRY OF COMMERCE AND INDUSTRY; ALSO ATTACHED TO LETTER (DATE ILLEGIBLE) FROM UNDER SECRETARY, KUWAIT MINISTRY OF COMMERCE AND INDUSTRY.

TEXT: Your November 13, 1992 letter to the Under Secretary, Ministry of Commerce Kuwait has just been brought to my attention (see attached). There are two statements in your letter that are incorrect. If the Kuwait government does not realize this, it is possible that US tire manufacturers could be adversely affected.

In your third paragraph, starting on line 3, you state" . . .all new tires sold for use on other motor vehicles must be certified as complying with Standard No. 119 (49 CFR Part 571.119)." This is not true. Only those tires designed and offered for sale for use on highway vehicles, other than passenger cars, must be certified as being in compliance with FMVSS 119.

The other misstatement in your letter is in your response to their question No. 1. "Must all tires manufactured and sold in the United States bear the 'DOT' mark?". Your answer - "Yes, assuming that the tires are intended for use on motor vehicles." is not correct. Only those tires intended for use on highway vehicles must be labeled with the DOT mark. NHTSA has stated in the past on more than one occasion that the DOT may not be labeled on tires that do not have an applicable Federal Motor Vehicle Safety Standard.

It is requested that NHTSA send a follow-up letter to Kuwait clarifying that your response applied only to motor vehicles and their tires that are designed primarily for use on the highway.

As mentioned to Walter Myers of your staff yesterday, I will ask Mr. Ed Wunder to discuss this with his contacts in Kuwait. Mr. Wunder is stationed in Saudi Arabia and is supported jointly by industry and the Department of Commerce (NIST) to help US manufacturers sell their products in the Gulf countries.