Interpretation ID: 1985-03.45

TYPE: INTERPRETATION-NHTSA

DATE: 09/17/85

FROM: AUTHOR UNAVAILABLE; Jeffrey R. Miller; NHTSA

TO: Hess & Eisenhardt Armoring Company

TITLE: FMVSS INTERPRETATION

TEXT:

Mr. Thomas J. Burke Vice President - Domestic Sales Hess & Eisenhardt Armoring Company 8959 Blue Ash Road Cincinnati, Ohio 45242

Dear Mr. Burke:

Thank you for your letter of July 3, 1985, to Mr. Burdette and Mr. Brownlee concerning a new automobile safety package your company is developing. Your letter was referred to my office for reply. You described your product as a number of modifications to a vehicle to improve its security. The modifications include changes to the windows, tires, doors, and fuel tank. I hope the following discussion explains how our regulations would affect your product.

The National Traffic and Motor Vehicle Safety Act authorizes the National Highway Traffic Safety Administration (NHTSA) to issue Federal Motor Vehicle Safety Standards for new motor vehicles and items of motor vehicle equipment. Under that authority, NHTSA has issued vehicle safety standards on a wide variety of subjects, including on tires, windows, doors and fuel tanks. I am enclosing an information sheet explaining how you can obtain copies of our standards. A manufacturer of new vehicles must certify that its vehicles conform to the requirements of all applicable safety standards. Under our certification regulation, Part 567, Certification (49 CFR Part 567), a person who modifies a vehicle prior to its first sale to the consumer is considered an "alterer." Part 567.7 requires vehicle alterers to certify that the vehicle, as altered, conforms to all of our safety standards. Thus, if your company is modifying vehicles with your security package prior to their first sale to the consumer, it must certify that the vehicles, as altered, conform with all applicable standards. Any person who fails to comply with our certification regulations is subject to person who fails to comply with our certification regulations is subject to civil penalties under the Vehicle Safety Act.

If your company is modifying used vehicles, then its actions would be affected by section 108(a)(2)(A) of the Vehicle Safety Act (15 U.S.C. S1397(a)(2)(A)), which was added to the Act in 1974 to address the problem of persons tampering with safety equipment installed on a motor vehicle. Section 108(a)(2)(A) provides, in part, that:

No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative, in whole or part, any device or element of design installed on or in a motor vehicle or item of motor vehicle equipment in compliance with an applicable Federal motor vehicle safety standard.....

Thus, manufacturer, distributor, dealer, or motor vehicle repair business making the modifications you describe must ensure that those modifications do not "render inoperative" the compliance of the vehicle with any safety standard. The Vehicle Safety Act provides for civil penalties for persons that "render inoperative" an element of a safety standard.

I hope this information is of assistance to you. If you have further questions, please let me know.

Sincerely

Jeffrey R. Miller Chief Counsel

Enclosure

Mr. Dick Burdette U.S. Dept. of Transportation Office of Public Affairs Washington D.C. 20590

Dear Mr. Burdette:

I am writing to you today because I need your assistance in preparing a new automobile safety package for the U.S. Market which Hess & Eisenhardt is about to introduce. We think your input, based on your experience and supported by statistics will prove invaluable.

Hess & Eisenhardt Armoring Company is the oldest and largest armored car manufacturer in the world. Hess & Eisenhardt originally founded in 1876, was first asked to assist in the design of President Franklin D. Roosevelt's Parade Car. For the last forty years, we have provided the armored vehicles for every United States President. Hess & Eisenhardt Armoring Company currently supplies armored vehicles to over thirty Heads of State worldwide as well as Ambassadors, Foreign Ministers, Diplomats, Industry Leaders, and private citizens.

Let me hasten to point out that we do not intend to introduce an "armored car" into the U.S. Market. Our product is definitely an automobile safety package. We believe that the experience we have gained in the many years we have been involved in automobile security can be provided to the public in a very cost effective manner. We have done extensive market research over the past twelve months and have received an enthusiastic response from the corporate world as well as many individuals. Please forward to me any information and statistics you might be able to provide that would pertain to the following components of our proposed safety package:

o Run Flat Tire Devices. o "New Generation" Shatter Resistant Glass (primarily intended to resist intrusion from the outside while providing an unprecedented shatter resistance to the standard tempered glass used in sidelights. o A highly sophisticated remote alarm system. o Dual batteries. o A trunk release mounted inside the trunk. o A fuel tank protector (with looking gas cap). o An emergency kit to include minor survival components such as: drinking water, flashlight, etc. o A door lock system that would prevent access to a stranger from the outside even if the driver forgets to lock the doors. o Anti-explosive gas tank. o An automatic engine fire suppression system. o Auxiliary fan. o Inside to outside intercom.

Any information you can provide will be greatly appreciated. We are now in the final stages of selecting the safety equipment which will go into our package and your input can help in the final design. As this product is primarily in the interest or the safety of the occupants, we would certainly not want to miss the opportunity to provide some safety feature you thought important. Please contact me directly if you have any other questions.

Sincerely,

HESS & EISENHARDT ARMORING COMPANY

Thomas J. Burke Vice President - Domestic Sales

TJB/7/vah