Skip to main content

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Interpretations

Interpretation ID: aiam2548

Mr. D. Bruce Henderson, Legislative Engineer, NVT Motorcycles, Ltd., Lynn Lane, Shenstone, Lichfield Staffordshire WS14 OEA, England; Mr. D. Bruce Henderson
Legislative Engineer
NVT Motorcycles
Ltd.
Lynn Lane
Shenstone
Lichfield Staffordshire WS14 OEA
England;

Dear Mr. Henderson: This is in reply to your letter of March 23, 1977, asking for a interpretation of Federal Motor Vehicles Safety Standard No. 123, *Motorcycle Controls and Displays*.; You have noted that Table 3 required the headlamp upper beam indicato to be identified as 'High Beam' while its control may be marked 'Hi' and 'Lo' at the appropriate positions. Because of space limitations near the upper beam indicator you would like to use the identification 'Hi Beam.'; In our opinion 'Hi Beam' would meet the intent of Standard No. 123 t provide a clearly recognizable identification for the upper beam indicator since, as you noted, it would make the display read the same as the control.; Sincerely, Frank A. Berndt, Acting Chief Counsel

Go to top of page