United States Department of TransportationInterpretation ID: aiam3454
Motor Vehicle Manufacturers Association
Suite 300
1909 K Street
N.W.
Washington
DC 20006;
Dear Mr. Adduci: On June 5, representatives of MVMA met with representatives of thi agency to discuss various issues concerning the application of Federal Motor Vehicle Safety Standard No. 115. At that meeting, the MVMA representatives requested clarification of the agency's policy on correction of errors made by vehicle manufacturers in their vehicle identification numbers (VIN's). This letter responds to that request.; The agency shares your concern about the potential difficultie associated with correcting erroneous VIN's and will attempt to minimize the burdens involved with any required corrective action. Nevertheless, the agency must consider the safety benefits of an accurate, national VIN system, as well as the anti-theft and other benefits of such a system.; This letter focuses on some of the most likely VIN errors and discusse whether those errors in vehicles sold to consumers would be inconsequential as the errors relate to safety, and, if not, what type of remedy would have to be provided to vehicle owners. Corrective action involving the replacing of an erroneous VIN plate or label or the restamping of the VIN on part of the vehicle is the most desirable remedy. However, there may be less burdensome remedies that would be effective and satisfy the National Traffic and Motor Vehicle Safety Act.; One type of error which could be easily corrected is an error in single VIN character other than the check digit or a character monitored by VIN users. The agency would likely regard such an error as inconsequential if the vehicle manufacturer submitted the necessary corrected decoding information to the agency. The agency would place this information in a public file, thereby making it available to other VIN users. With this corrected decoding information available, the agency's safety research activities would not be impaired and manufacturers would still be able to conduct recall campaigns where necessary.; A second type of error involves an erroneous check digit or othe character monitored by vehicle records systems of States or other VIN users. Erroneous check digits could adversely affect our ability to conduct research and to monitor recalls, since the error rate of VIN transcription would presumably be higher in the absence of a properly functioning check digit. Further, without some form of corrective action by the manufacturer (such as restamping or the use of a correction label), vehicle purchasers could face rejections by State, insurance, and other data-processing systems using the check digit to verify transcription accuracy. However, the agency is also concerned that the use of labels could create opportunities for auto theft operations to generate bogus VIN's. Therefore, the agency is presently inclined to treat erroneous check digits as inconsequential noncompliance if the manufacturer reports the errors to the agency. However, as discussed below, the agency is planning to invite public comment on this question before establishing a final position on the matter.; A third type of error involves the physical aspects of the VIN itself For example, a manufacturer might use a type face other than the sans serif type face required by the standard. Although errors of this type would have to be resolved on a case-by-case basis, they would likely be deemed inconsequential because they would present no problems to the agency, other VIN users, or vehicle owners.; The most difficult type of errors would involve a major error i numbering which would impair the safety and other uses of the VIN. An extreme example of such an error would be a situation where a manufacturer numbered many of its vehicles identically, or where the VIN's were totally illegible. An error of that magnitude could impair the manufacturers' (sic) ability to conduct recall campaigns and the ability of the agency to monitor them. It would also cause serious problems for all VIN users. In this type of situation (which should arise rarely, if ever), some form of corrective action would be necessary. The use of a correction label which meets all requirements of FMVSS 115 including indelibility would be one possible approach.; One final matter discussed at the June 5 meeting relates to th correction of VIN errors on vehicles already produced but still in the possession of the manufacturer. We would treat these vehicles the same as the vehicles already sold, i.e., if the noncompliance were inconsequential for the vehicles already sold, it would also be inconsequential for the vehicles produced but still in the manufacturer's possession. However, the agency would expect that once the error is detected, similar vehicles produced thereafter would fully comply with the standard. There is precedent for this approach, since the agency has previously treated as inconsequential noncompliance erroneous identification numbers on tires still in the manufacturer's possession, where an inconsequentiality petition has been granted with respect to tires already sold.; The agency will issue in the near future a notice inviting comment o MVMA's petition to change Standard 115 to a general regulation. In this notice, we will seek comment on the types of corrective action discussed above. If you have any thoughts on other means of making these types of corrections, we would of course be pleased to receive your views.; Sincerely, Frank Berndt, Chief Counsel