Interpretation ID: nht80-2.31

DATE: 05/06/80

FROM: AUTHOR UNAVAILABLE; Frank Berndt; NHTSA

TO: International Harvester Company

TITLE: FMVSS INTERPRETATION

TEXT: This is in response to your letter of April 3, 1980, requesting confirmation of the applicability of S4.4 of Federal Motor Vehicle Safety Standard No. 115 (49 CFR 571.115) solely to light trucks and passenger cars.

Although Standard No. 115 applies to a variety of vehicle types, including multipurpose passenger vehicles, the location requirement in S4.4 regarding the placement of the vehicle identification number is of more limited applicability. The section expressly provides that the requirement applies to passenger cars and to trucks with a gross vehicle weight rating (GVWR) of 10,000 pounds or less only. Since Standard No. 115 does not contain any other VIN location requirement, manufacturers of multi-purpose passenger vehicle, buses, trailers, incomplete vehicles, and heavy trucks are not limited by that standard in their choice of a VIN location. For definitions of these vehicle types, see 49 CFR 571.3.

Sincerely,

ATTACH.

April 3, 1980

Frederic Schwartz -- Office of Chief Counsel, National Highway Traffic Safety Administration

SUBJECT: Applicability of FMVSS115, S4.4

Dear Mr. Schwartz:

This letter will confirm a telephone conversation of February 13, 1980 between Mr. R. C. Hamilton and yourself regarding the applicability of FMVSS 115 paragraph S4.4 to Multi Purpose Vehicles. Mr. Hamilton was advised of the following:

S4.4 does not apply to MPV's or vans. Further, the NHTSA had not intended for MPV's or vans to meet the requirement that the VIN be readable through the windshield glass from a point outside the vehicle. As written S4.4 is applicable only to passenger cars and light trucks with a GVWR of 10,000 pounds or less. The above represents our understanding of the applicability of S4.4 of FMVSS 115.

Sincerely, INTERNATIONAL HARVESTER COMPANY;

F. L. Krall, Manager -- Technical Legislation