United States Department of TransportationInterpretation ID: aiam3692
President
VREDUSA
P.O. Box 279
Somerset
NJ 08873;
Dear Mr. Lauro: This responds to your recent letter asking if you can legally sel certain tires you have imported from the Netherlands. These truck tires have a DOT symbol on the sidewall but do not have a maximum load rating and corresponding inflation pressure labeled on the sidewall.; Under Federal law, these tires cannot be sold or otherwise introduce into interstate commerce because they do not comply with all requirements of Safety Standard No. 119, *New Pneumatic Tires for Motor Vehicles Other Than Passenger Cars* (49 CFR S571.119). Paragraph S6.5(d) of Standard No. 119 (copy enclosed) requires that a maximum load rating and corresponding inflation pressure be labeled on both sidewalls of each tire subject to the standard. The tires described in your letter plainly do not meet this requirement. Hence, the DOT symbol on those tires is misleading, since that symbol is supposed to be a manufacturer's certification that the tires comply with all requirements of Standard No. 119.; Section 108 of the National Traffic and Motor Vehicle Safety Act (1 U.S.C. 1397) specifies that no person shall sell or introduce into interstate commerce any item of motor vehicle equipment (which includes tires) unless the item is in conformity with all applicable safety standards. Section 109 of the Safety Act (15 U.S.C. 1398) sets forth a civil penalty of up to $1000 for each violation of section 108, and each of these nonconforming tires would be treated as a separate violation of section 108 if they were offered for sale or introduced into interstate commerce.; At this point, you have two legal courses of action open to you. Yo may have the tire manufacturer file a petition requesting an exemption from the noncompliance of these tires, arguing that the noncompliance is inconsequential as it relates to the safety of the tires. The procedures to be followed in filing a petition for an inconsequential noncompliance are set forth in the enclosed copy of 49 CFR Part 556, *Exemption for Inconsequential Defect or Noncompliance*. I cannot state at this time that the absence of maximum load information would be viewed as inconsequential, but we would certainly give full consideration to any petition the manufacturer might submit. If the petition were granted, you could sell these tires.; The other course of action available to you is to ship these tires bac to the manufacturer in the Netherlands and explain that they do not satisfy the requirements of Standard No. 119. I appreciate your efforts to ensure that you are complying with all applicable Federal regulations with respect to the sale of tires you import.; Sincerely, Frank Berndt, Chief Counsel