Interpretation ID: nht92-6.47

DATE: May 19, 1992

FROM: Paul Jackson Rice -- Chief Counsel, NHTSA

TO: B.J. Forney

TITLE: None

ATTACHMT: Attached to letter from B.J. Forney to Diane K. Steed (OCC 7235)

TEXT:

This responds to your letter, asking whether a vehicle equipped with a product you have invented could be operated legally on the public roads. Although your letter did not provide details of this invention, it appears it would supply wind energy to the engine in an effort to reduce the amount of gasoline burned to power the engine. I am pleased to have this opportunity to explain our regulations to you.

By way of background, the National Traffic and Motor Vehicle Safety Act (the Safety Act) authorizes this agency to issue Federal motor vehicle safety standards that set performance requirements for new motor vehicles and new items of motor vehicle equipment. While NHTSA has not issued any standards that apply directly to devices like your product, our safety standards do establish minimum performance requirements for a number of vehicle systems, including the braking system, the accelerator control system, and fuel system integrity. Accordingly, while you would not have to certify that your product complies with any safety standards, any person installing your product on a new vehicle prior to the first retail sale of the vehicle would be required to certify that the vehicle continues to comply with all applicable safety standards with your product installed. NHTSA is not authorized to certify or approve motor vehicles for compliance with the Federal safety standards. Instead, under the Safety Act, each manufacturer of a motor vehicle or item of motor vehicle equipment is responsible for certifying that its products meet all of our applicable safety standards.

After the first retail sale of a vehicle, a person installing your product on the vehicle would no longer be required to certify that the vehicle continued to comply with all applicable safety standards. Instead, a different provision of Federal law would be relevant. This provision is 108(a)(2)(A) of the Safety Act (15 U.S.C. 1397(a)(2)(A), which specifies that, "no manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative, in whole or in part, any device or element of design installed on or in a motor vehicle or item of motor vehicle equipment in compliance with an applicable Federal motor vehicle safety standard." This statutory provision would be violated by a manufacturer, distributor, dealer, or repair business if its installation of your product on a vehicle caused the vehicle to no longer comply with one of our safety standards.

Finally, NHTSA has authority to investigate allegations that items of motor vehicle equipment, such as your product, contain defects related to motor vehicle safety. If either you, as the manufacturer of the product or this agency were to determine that your product contained a defect related to motor vehicle safety, you would be required to notify owners of your product and to remedy any such defect without charge to the owner, as provided in sections 151-160 of the Safety Act (15 U.S.C. 1411-1420).

As you see, the laws and regulations of this agency do not directly relate to the use of any product. The individual States have authority to regulate the operation and use of vehicles and motor vehicle equipment within their borders. For further information on the laws of the States, you may wish to contact: American Association of Motor Vehicle Administrators, 4600 Wilson Boulevard, Arlington, VA 22203.

I hope this information is helpful. If you have any further questions about NHTSA's safety standards, please feel free to contact Marvin Shaw of my staff at this address or by telephone at (202) 366-2992.