Interpretation ID: aiam1841
United States Senator
Federal Building
Lakeland
FL 33801;
Dear Senator Chiles: This is in response to your letter of March 5, 1975, forwarding a inquiry from one of your constituents, Mr. Vincent Tetuan, concerning a proposed amendment to the Federal bumper standard.; On January 2, 1975, the National Highway Traffic Safety Administratio (NHTSA) issued a Federal Register notice (copy enclosed) proposing to reduce the current 5 mph bumper impact requirements to 2.5 mph until the 1979 model year. The impact requirements would then have been increased to 4 mph for 1979 and later model year cars.; The proposal was based primarily on the results of two agency-sponsore studies which indicated that the cost and weight of many current production bumpers, in light of inflation and fuel shortages, made the bumpers no longer cost beneficial. Information presented at public hearings on the bumper notice and comments submitted to the docket in response to the proposal have brought to light additional data. The NHTSA has carefully examined all of this evidence and reviewed its studies in light of the new information. As a result, the agency has concluded that the 5 mph protection level should not be reduced. This decision is contained in a Federal Register notice that was published March 12, 1975 which is enclosed (Docket No. 74-11, Notice 7, Docket No. 73-19, Notice 6).; Mr. Tetuan appears to be directing his comments to what he believes t be a proposed requirement that vehicles manufactured in the future be equipped with plastic bumper systems. Such an understanding of the proposal is incorrect. The January 2, 1975 proposal was aimed at enabling a reduction in vehicle weight. In the preamble to that notice, the NHTSA cited soft face bumpers as one type of system that could produce a significant weight reduction. However, no proposal was made to require the use of soft face systems. The March 12, 1975 notice reiterates the agency's position that bumpers which are lighter in weight than those currently in mass production could and probably would be developed. The requirements proposed in the March notice, however, ensure that a wide variety of materials could continue to be used in bumper systems.; Sincerely, James C. Schultz, Chief Counsel