Interpretation ID: 1982-2.23

DATE: 07/23/82

FROM: AUTHOR UNAVAILABLE; F. Berndt; NHTSA

TO: Ron Gustafson

TITLE: FMVSS INTERPRETATION

TEXT: This responds to your letter of June 28, 1982, asking about requirements applicable to child restraints sold in the United States as well as any necessary permits or licenses. You also asked about any U.S. testing organizations, procedures or standards for child restraints.

All child restraints sold in the U.S. must conform with the minimum performance requirements of Federal Motor Vehicle Safety Standard No. 213, Child Restraint Systems. The standard also sets out the test procedures that are used to measure the performance of child restraints. There are no other performance requirements or test procedures applicable to child restraints. I am enclosing a copy of the standard.

You are not required to obtain a permit or license from this agency prior to selling a child restraint in the U.S., nor are you required to obtain approval from any U.S. testing organization. As a manufacturer of motor vehicle equipment, you are required by Part 566, Manufacturer Identification, of our regulation to submit certain identifying information to the agency. I have enclosed a copy of Part 566.

In addition, you would be required by the National Traffic and Motor Vehicle Safety Act (15 U.S.C. @ 1392 et seg.) to certify that your child restraint complies with all applicable Federal Motor Vehicle Safety Standards. Under the Act, you would also be responsible for conducting a notification and remedy campaign for any safety-related defect in your product. I am enclosing a copy of the Act, which defines your responsibilities as a manufacturer.

If you have any further question, please let me know.

ENCLS.

June 28, 1987

Furudals Bruks Kursinternat 790 70 FURUDAL Sweden

National Highway Safety Administration

To Whom it May Concern:

I am interested in receiving information concerning rules, regulations, requirements, procedures for testing, etc. concerning child safety seats in automobiles. There is interest in introducing a such a product in the USA. Therefore I would like to know of any minimum requirements (re: design, construction, materials, etc.) as well as any permits or licenses regarding those requirements. Also if there are any US testing organizations, procedures, or standards for this type of product please inform me. Thank you.

Ron Gustafson RON GUSTAFSON